P.06
Operating Instructions
◆After the device is powered on,only the power light is on in the standby
(shutdown)state.
◆Timing status indicator ：it will be on for a long time if the timing is
valid, it will flash when setting and viewing, and it will be off if it is invalid.
◆Slow speed indicator light ：if the wind speed is set to slow speed,
it will be On, otherwise it will be off.
◆Quick indicator light ：if the wind speed is set as fast wind, it will be
on, otherwise it will be off.
◆Dry clothes mode indicator ：when dry clothes mode is selected, it
will be on, otherwise it will be off.
◆Dehumidification mode indicator light ：it will be on when
dehumidification mode is selected and it operates. When the ambient
humidity reaches the set humidity and stops, the indicator light will flash,
otherwise it will be off.
◆Continuous dehumidification mode indicator ：when continuous
dehumidification mode is selected, it will be on, otherwise it will be off.
◆When the ambient humidity reaches the set humidity and stops, display
will flash.
◆Water full indicator light : when the water is full, it will flash, otherwise
it will go out.
◆When the equipment alarms, display will flash the alarm code.(alarm
code and humidity rotation display)
◆In normal operation, display will show the current ambient humidity
value.
Display Status Description
TIMER
LOW
HIGH
DRY
DEHU
CONT
To Next Page
Loading...