To Next PageTo Next Page
Need help?Do you have a question about the Hewlett Packard Enterprise ProLiant MicroServer Gen10 Plus and is the answer not in the manual?
Covers safety precautions, symbols, warnings, and preparation steps before component replacement.
Detailed steps for removing and installing core server components like system board, processor, DIMMs, and heatsinks.
Procedures for replacing drives, bezel, iLO, expansion boards, riser, fan, battery, and TPM.
Explains NMI crash dumps for diagnosing system hangs and unresponsive issues.
Details embedded system ROM utilities for configuration, including boot mode and secure boot.
Describes the server setup tool for installing OS, drivers, and firmware.
Tool for configuring arrays on Smart Array SR controllers in various interface formats.
Identifies key components on the system board, including TPM, fan, SATA ports, and DIMM slots.
Details how to get live assistance and access documentation via the HPE Support Center website.
General| Form Factor | Ultra Micro Tower |
|---|---|
| Chipset | Intel C246 |
| Memory Slots | 2 |
| Processor | Intel Xeon E-2224 or Intel Pentium G5420 |
| Processor Threads | 4 (Xeon E-2224, E-2224G, Core i3-9100, Pentium Gold G5420, Celeron G4930) |
| Processor Base Frequency | 3.4 GHz (Xeon E-2224) |
| Processor Max Turbo Frequency | 4.6 GHz (Xeon E-2224) |
| Memory | Up to 64 GB |
| Storage Bays | 4 LFF (3.5-inch) or 4 SFF (2.5-inch) bays |
| Maximum Internal Storage | Up to 64TB (with 16TB drives) |
| RAID Support | RAID 0, 1, 5, 10 |
| Network Controller | HPE Ethernet 1Gb |
| Expansion Slots | 1 PCIe 3.0 x16 slot |
| USB Ports | 2 USB 3.0, 2 USB 2.0 |
| Video Output | 1 VGA |
| Operating System Support | Windows Server, Linux |
