Do you have a question about the Hewlett Packard Enterprise StorageWorks 8/8 Base SAN Switch and is the answer not in the manual?
General introduction to the HPE 8-Gb SAN Switch capabilities and architecture.
Details on the various HPE 8-Gb SAN Switch models available.
Explains features for 8/8, 8/24, 8/40, 8/80, Encryption, FCoE, and 1606 Extension switches.
Procedures for installing and activating port upgrade licenses.
Information on ISL Trunking groups and supported SFP transceivers.
Lists available software kits, licenses, and optional hardware.
Essential safety, electrical, environmental, rack, and cabling guidelines for installation.
Step-by-step guide for installing switches using rack mount kits and plenums.
Covers connecting to fabric, powering, serial/Ethernet setup, IP, domain ID, and time settings.
Procedures for verifying, backing up, and changing switch names.
Guides for configuring Encryption, FCoE, and 1606 Extension SAN switches.
Steps to check switch functionality and fabric status.
Explains LED indicators and their meanings for various switch models.
Procedures for installing SFPs, running diagnostics, and replacing FRUs.
Details on switch weight, dimensions, and power supply specifications.
Electrical, thermal, cabinet, and EMC requirements for operation.
Covers data transmission ranges, latency, and Fibre Channel port specs.
Information on the power-on self-test (POST) and system boot process.
How to contact HPE technical support and register products.
Links to documentation, HP websites, and feedback channels.
Information on rack stability, typographic conventions, and customer self-repair.
FCC notices, cable requirements, RMN, and laser device safety.
Notices for Canada, EU, and other regions, plus battery safety.
WEEE directive for waste disposal and power cord requirements.
| Brand | Hewlett Packard Enterprise |
|---|---|
| Model | StorageWorks 8/8 Base SAN Switch |
| Category | Switch |
| Language | English |
Loading...