HHC CH18 - User Manual

1/4

CH18HandControlInstructions
1.ProductOverview
ProductName：HandControl
ProductModelNo.：CH18
FCCID:2AEQWCH18HHC003

2.Environmentrequirement
Operationtemperature:+10℃~+40℃.
Storagetemperature: －10℃~65℃.
OperatingHumidity：10%~80%RH，non‐condensing.
StorageHumidity：10%~85%RH，non‐condensing.

3.DirectionsforOperation
Inordertooperate,placethree
1.5VAAAbatteriesintheremotecontrolanduseinconjunction
withtheCB18controlbox.Inaddition,thePSK2920Apowersupplyswitchmustbeconnectedas
thepowersupplyforthecontrolbox.Detailedoperationdirectionsbelow:
MatchCode：
Pressandholdthebutton,approx.15seconds,untiltheremote’sfrontindicatorlights
up.Then,connectittothecontrolboxPowerplug.Afterthebeepsound,thepairingiscomplete
andremotecanoperate.











Indicator
light


HHC CH18 Specifications

General

Brand	HHC
Model	CH18
Category	Control Unit
Language	English

Summary

Product Overview

Environment Requirements

Operating Conditions

Specifies the required operating temperature and humidity ranges for the device.

Storage Conditions

Specifies the required storage temperature and humidity ranges for the device.

Operation Instructions

Pairing the Remote

Details the steps for pairing the remote control with the control box.

Remote Control Functions

Backrest Control

Instructions for lifting and lowering the backrest using the remote.

Footrest Control

Instructions for lifting and lowering the footrest using the remote.

Bed Tilt Control

Instructions for controlling the bed tilt function, if available.

Massage Function

Instructions for adjusting the intensity of the massage functions.

Backlit Illumination

Information on how to activate the remote's backlit buttons for night use.

Safety and Precautions

Battery Handling

Guidelines for battery usage, replacement, and disposal to prevent damage.

FCC Compliance

Information regarding FCC rules, interference, and safe operation of the device.