Hi-Target iBoat BS2 - Preface

BS2 USV User Manual
III
Preface
Introduction
Thank you for using the Hi-Target iBoat BS2 USV system. This introduction describes how to
use the iBoat BS2 USV system
Experience Requirement
In order to help you use the Hi-Target iBoat BS2 USV system better, we suggest you carefully
read the instructions. If you are unfamiliar with it, please refer to http://www.hi-target.com.cn/
Tips for Safe Use
Notice: The contents here are special operations and need your special attention.
Please read them carefully.
Warning: The contents here are very important. Wrong operation may damage
the machine, lose data, break the system and endanger your safety.
Exclusions
Before using the product, please read these operating instructions carefully, they will help you
to use it better. Hi-Target assumes no responsibility if you fail to operate the product according
to the instructions, or operate it wrongly, due to misunderstanding the instructions.
Hi-Target is committed to constantly perfecting product functions and performance, improving
service quality and we reserve the right to change these operating instructions without notice.
We have checked the contents of the instructions, the software and hardware, without eliminating
the possibility of error. The pictures in the operating instructions are for reference only. In case
of non-conformity with products, the products shall prevail.
Technical Support and Service
If you have any technical issues, please call Hi-Target’s technology department for help.
Relevant Information
You can obtain this introduction by:
1. Purchasing Hi-Target products: you will find this manual in the instrument container to guide
you on operating the instrument.
2. Logging onto the Hi-Target official website, downloading the electronic version introduction
at Partners → Partner center.