Data obtain
1 Install Microsoft ActiveSync
In the incidental disk (tool software \ connection program \ ActiveSync), double click MSASYNC45.
exe file, please follow the instructions to complete installation. After the installation, find
Microsoft ActiveSync and operate it in the "start menu" "program" .Set up "allows the USB
connection" In the menu "connection Settings", as shown in figure 4-21.
Figure3-11
2 The hardware connection
First，switch on Qstar series high precision mobile GIS product, enter the Windows system,
it is no need to open applications. Connect the USB port which with a smaller cable line with the
Qstar series high precision mobile GIS product , connect the other end USB plug with your PC.
3 Software connection
When the cable is connected ,the Microsoft ActiveSync in the computer will tips you "whether
need to establish cooperation relationship," choose “cancel”， Then Microsoft ActiveSync popup a
hint, click "ok"。Then it has been connected successfully. If it is the first connections, the computer
will tips you to install the driver, just installed Windows compute driver according to guide.
4 download data
Click on the“ browse button”of the Microsoft ActiveSync, open the resources browser of Qstar
series high precision mobile GIS product ,you can enter the related file and copy data to the
computer.
Application functions
Qstar series high precision mobile GIS product is equipde with PPP technology (the
technology used in Qmini MP model), built-in GPS navigation and positioning, digital camera,
microphone, 3 G communications (this function is optional), and other functions, but it must be
installed with the corresponding software. Qstar series high precision mobile GIS product is
equipped with Hi-Q software, as to how to use Hi-Q software to operate of the application functions
above, please refer to my company's "Hi-Q software operation instruction" content.
To Next Page
Loading...
Need help?
General
