HIBLOW hp-100 User Manual

1
HP-100/120
HP
HP Series
STRUCTURE AND PART NAMES
HP-100/120
HP-100
HP-120
1997/10
1997/10
─
─
HP-100/120
漓 FilterCover
滷 SemiCoverPacking
澆 Filter
潺 FittingBoss
潸 UpperHousing
澁 SoundAbsorber(Lap) 
澀 CasingBlockA
潯 ValveChamberpacking
潛 CasingBlockB
濳 Valve
潭 DiaphragmRing
澂 Diaphragm
潼 DiaphragmBase
潘 FrameCover
澎 SPSwitch
澑 Safetypin+Lockingcollar
濂 Electromagnet
潦 ActuatingRod
澳 L-Tube
澣 HoseBand
澡 Frame
澤 VibrationControlRubber
澹 CenterPlate
濆 Gasket
澪 SoundAbsorber(Filter)
濟 LowerHousing
濕 PowerCord
Air pump Start of production Discontinuance of production

HIBLOW hp-100 Specifications

General

Model	HP-100
Category	Air Compressor
Flow Rate	100 L/min
Noise Level	40 dB
Frequency	50/60 Hz
Type	Diaphragm Pump
Voltage	120 V

Summary

HP Series

Structure and Part Names

Provides an exploded view and list of all parts for the HP-100/120 model.

Replacing the Chamber Block

Safety Precautions for Chamber Block Replacement

Highlights critical safety warnings, including unplugging the unit and magnetic force effects.

Chamber Block Removal Steps

Details the initial steps for removing the chamber block, including housing and L-tube detachment.

Diaphragm and Valve Replacement

Guides on replacing diaphragms and valves, including detachment from the diaphragm base.

Fitting New Valves

Instructions on inserting new valves into the valve seat and securing them.

Chamber Block Reassembly

Covers fitting the actuating rod and securing the casing blocks with screws and nuts.

Safety Pin Replacement

Procedure for replacing the safety pin and its locking collar for pump safety.

Final Housing Reassembly

Details installing the sound absorber and upper housing, including filter placement.

Replacing the Electromagnet

Electromagnet Removal Steps

Instructions for cutting wires, removing the SP switch, and detaching the electromagnet.

Fitting New Electromagnets

Steps for mounting new electromagnets and connecting wires via soldering.