Need help?Do you have a question about the HIBLOW hp-40 and is the answer not in the manual?
General| Model | HP-40 |
|---|---|
| Category | Air Compressor |
| Max Flow Rate | 40 L/min |
| Diaphragm Material | EPDM |
| Max Pressure | 0.03 MPa |
| Rated Pressure | 0.15 bar |
| Voltage | 120V |
| Frequency | 60Hz |
| Noise Level | 32 dB |
| Operating Temperature | 40°C |
Details the pump's purpose and how it operates via electromagnetic vibration for air pumping.
Highlights risks like electrocution and airflow blockage, advising on safe installation practices.
Essential safety guidelines for products with grounding plugs and outlets.
Explains wiring methods and provides a diagram for permanent installations.
Specifies the need for an upright, level, and stable mounting surface for optimal operation.
Details connecting the exhaust port using an L-shaped rubber hose and securing it.
Covers operational warnings, temperature advice, and explains the electromagnetic vibration mechanism.
Details safety for servicing, filter cleaning/replacement, and general maintenance checks.
Step-by-step guide to detach the head (casing) block from the pump mechanism.
Explains the alarm module's functions, toggle switch (RUN, MUTE, TEST), and how to respond to alarms.
Details the 12-month warranty, coverage limits, exclusions, and contact information for service.
To Next Page
