HIBLOW hp-200 - User Manual

1
Instruction Manual
for
HIBLOW Air Pumps
Models
HP-150 and HP-200
FEATURES
We thank you very much for purchasing our TECHNO TAKATSUKI HIBLOW air pumps.
In order to ensure that you will receive many years of dependable service from your HIBLOW air
pumps as well as to fully utilize the pump performance for effective operation, be sure to read
through this instruction manual to gain full understanding before proceeding to actual operation.
Furthermore, when operating the pump, be sure to observe all the precautions and recommendations
contained in this manual.
After reading this manual, keep it for future reference in an easily accessible place.
ENERGY SAVING
Adopting an electromagnetic vibrating system designed for energy saving allows less power con-
sumption (on our product basis).
DURABILITY AND STABILITY
A diaphragm made of excellent special synthetic rubber is used along with a diaphragm ring, which
permits an extended period of continuous operation with increased stability in delivery capacity.
LOW NOISE LEVEL
The air circuit and pump structure are of noiseproof design, thus providing a low operating noise level.
AUTOMATIC STOP MECHANISM
A damage to the diaphragm will automatically stop the pump by means of a safety popping switch,
lessening occurrence of a secondary failure from occurring.
NO LUBRICATION REQUIRED
The pump structure that has no sliding parts and is totally oil-less provides oil-free, clean exhaust air.
COMPACT AND LIGHTWEIGHT DESIGN
Our unique design know-how has made it possible to achieve compact, lightweight and powerful air
pumps.
EASY MAINTENANCE
Repair parts can be easily replaced, and easy cleaning and replacement of air filters are also made
possible by adoption of a one-touch cover.
!
WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
!
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or property damage.
An explanation of the two different types of hazards
紙色：オレンジ

Summary

Hazard Information and Product Features

Warning vs. Caution

Explains the difference between WARNING and CAUTION hazard indicators used in the manual.

Operational Advantages

Highlights energy saving, durability, low noise, automatic stop, and oil-less operation.

Design and Maintenance

Covers compact/lightweight design and ease of maintenance for the air pumps.

Installation Precautions

Installation Place Recommendations

Install the pump in a well-ventilated place, away from inundation risks, and with easy access for maintenance.

Installation Method Guidelines

Ensure a level foundation, use appropriate PVC tubing, ground the appliance, and use a waterproof socket.

Maintenance Procedures

Filter Cleaning and Replacement

Unplug the pump, remove the filter cover, clean or replace the filter, and reassemble carefully.

Chamber Block Replacement

Details the process of replacing chamber blocks, including block configuration.

Safety Automatic Stop Switch (SP Switch)

Explains the SP switch structure, function, and replacement procedure.

HIBLOW hp-200 Specifications

General

Model	HP-200
Category	Water Pump
Maximum Flow Rate	200 L/min
Power Consumption	200 Watts
Frequency	50/60 Hz
Maximum Pressure	0.02 MPa