EN
1. I.Clean the powder outlet channel and grinding wheel at least once every two weeks.
2.When the powder output decreases, please clean the powder output channel and grinding wheel.
3. When using the grinder to finish grinding fine coffee powder, please clean out the powder channel in time.
4. The machine has anti-static powder system, when the coffee powder floating out of the funnel, please use a brush to
clean the powder crossing position in time.
Cleaning method of bean grinder:
Note: When cleaning the grinder, please make sure there are no beans in the bean box, and press the
grinder button, the grinder can work normally, no coffee powder out of the outlet.
1. Turn the bean box counterclockwise and remove the bean box.
2.Rotate the internal grinding wheel counterclockwise, clean the grinding wheel with the attached
cleaning brush, and remove the coffee powder in the teeth; Please note that the mill wheel should not
be washed directly with water.
3.Use the supplied cleaning brush to clean the grinder cavity and outlet channel.
4.Do not install the grinding wheel at this time, reinstall the empty bean box, press the grinding button,
and let the grinder run to sweep out the remaining powder in the grinding bean cavity. (If not, repeat
steps 3 and 4).
5.Remove the bean box counterclockwise, install the grinding bean wheel, and finish cleaning.
4. Descaling reminder
This product is equipped with descaling reminder function and descaling program, which needs the
cooperation of users in the descaling process. The whole process of running the program is expected to
take about 10 minutes.
Note: when the descaling program isstarted, please ensure that:
1. Ensure that there is at least 1 liter of water in the water tank.
2. Empty the water tray and install it in place.
3. Power up the appliance and put it in standby mode.
4. Place2 cups of filter screen into the funnel.
5. Screw the funnel into the funnel support.
6. The cleaning function can be exited at any time by pressingthe power button.
7.Whenthecleaningprogramstarts,theo indicatorlightanddescalingindicatorlight will flashandprompt,andwill flash
throughout the operation.
8. Ifthe descaling step is not started within 1 minute, the appliance will exit the descaling cycle and return to the standby state.
Descaling instructions
It is recommended to descale every 4-6 months;
Descaling can be selected: (j) Coffeemachinedescalingtablet @Liquiddetergent @Whitevinegarandwarmwater
Descaling cycle
The descaling cycle takes about 10 minutes.
Note: After the descaling reminder starts or before the user starts the descaling program, please
complete the following descaling preparations before running the descaling program!
Descaling preparation
Add the solution to the water tank (choose one of three methods)
(j) Fill 1 liter of water into the water tank. Add descaling tablets and wait
until the descaling tablets are dissolved;
@Add half a cup of liquid descaling agent into the water tank, and then
inject 1 liter of warm water to allow the solution to mix thoroughly;
@ Add 1.5 tablespoons of white vinegar to the water tank, and then
inject 1 liter of warm water to allow the solution to mix thoroughly.
Insert water tank into position.
11 /
To Next Page
Loading...