EN
Powder hammer
1
When the edge of tamper align to edge of
Tamp the coffee powder downwards
funnel, powder amount is appropriate
BEFORE THE FIRST USE
1. Check and ensure that all accessories are complete and free from damage.
2. Fill the water tank with water, and the water level shall not exceed the max position.
3. Take the high-pressure funnel (no coffee powder at this time) and align it with the buckle of the funnel
support, and rotate it counterclockwise to lock the funnel (put a single cup or double cup filter screen as
required)
4. Connect the power supply and press the power button to enter the preheating State until the whole
machine is preheated and enters the Standby State.
5. Turn the knob to the IJ position to release an appropriate amount of Steam (please note that the Steam
pipe should be aligned with the water tray or use a cup to receive water to avoid scalding)
6. Press the button of single cup of coffee or double cup of coffee to clean the pipeline of the machine
(please be careful not to put any part of your body under the funnel, please use the cup to receive water
to avoid scalding).
7. After the water in the pan Stops flowing out.
8. Thoroughly clean the detachable parts of the whole machine with warm water.
CDChoose therightcoffeepowder
coffee powder
Coffee should be freshly ground and deeply roasted. You may need to use French or Italian roagted coffee
powder for espresso. Pre ground coffee powder can only remain fragrant for 7 to 8 days unless Stored in a
sealed container and in a cool place. Do not Store coffee in the refrigerator or freezer. Generally, it is not
recommended to use pre ground coffee powder. It is easier for coffee beans to retain coffee aroma and
obtain higher coffee quality.
06
To Next Page
Loading...