Hickok 539C - Standard EIA Guarantee and Repair Procedures; Returning Equipment for Repair

STANDARD EIA GUARANTEE
The Hickok Electrical Instrument Company warrants instruments manufactured
by it to be free from defective material or factory workmanship and agrees to
repair such instruments which, under normal use and service, disclose the de-
fect to be the fault of our manufacturing. Our obligation under this warranty is
limited to repairing any instrument or test equipment which proves to be defec-
tive, when returned to us transportation prepaid, within 90 days from the date
of original purchase, and provided the serial number has been made known to us
promptly for our records.
This warranty does not apply to any of our products which have been repaired
or altered by unauthorized persons or service stations in any way so as, in our
judgment, to injure their stability or reliability, or which have been subject to
misuse, negligence, or accident, or which have had the serial number altered,
effaced or removed. Neither does this warranty apply to any of our products
which have been connected, installed, or adjusted otherwise than in accordance
with the instructions furnished by us. Accessories, including all vacuum tubes
not of our manufacture, used with this product are not covered by this warranty.
This warranty is in lieu of all other warranties expressed or implied, and no
representative or person is authorized to assume for us any other liability in
connection with the sale of our products.
Parts will be made available for a minimum period of five years after the manu-
facture of this equipment has been discontinued. Parts include all materials,
charts, instructions, diagrams, accessories, etc., which have been furnished
in the standard model.
RETURNING EQUIPMENT FOR REPAIR
Before returning any equipment for service, under warranty or otherwise, the
Service Department in Cleveland must first be contacted giving the nature of the
trouble. Instructions will then be given for either correcting the trouble or re-
turning the equipment to one of our service stations. All correspondence per-
taining to repairs should be directed to the Hickok Electrical Instrument Company
10636 Leuer Avenue, Cleveland 8, Ohio - Attn. Service Department.
REGISTRATION CARD
The above guarantee is contingent upon the attached
registration card being returned to the factory im-
mediately upon receipt of the equipment.
THE HICKOK ELECTRICAL INSTRUMENT COMPANY
Cleveland, Ohio