Hico Medical Systems HICO-VARIOTHERM 550 User Manual (English)

Questions and Answers:

M
Martin JohnsonSep 7, 2025
What to do if Hico Medical Systems Medical Equipment displays alarm and display message: “CHECK UNIT” “UNDERTEMPERATURE”?
- L
  Luis YoungSep 7, 2025
  If your Hico Medical Systems Medical Equipment displays the alarm message “CHECK UNIT” “UNDERTEMPERATURE”, it may be because the unit is too cold (less than 9°C), there is a sensor break T2, or the water tank is frozen. Allow the unit to warm up at room temperature for a while. If the water tank is frozen, let the unit defrost and examine it for frost damage to see if water is flowing out.
R
Ronald RoseSep 8, 2025
What to do if Hico Medical Systems Medical Equipment unit does not function at all and acoustic alarm?
- B
  Barry KimSep 8, 2025
  If your Hico Medical Systems Medical Equipment unit does not function at all and there is an acoustic alarm, it could be due to a mains power failure, the mains connector not making contact, a defective fuse, or a defective unit. Switch off the unit until power returns if there is a mains power failure. Check the connector on the unit and in the socket for a correct fit.
B
Brandon LandrySep 10, 2025
Why nominal value was not reached during cooling with my Hico Medical Systems Medical Equipment?
- M
  Maria RichardsonSep 10, 2025
  If the nominal value was not reached during cooling with your Hico Medical Systems Medical Equipment, the cooling capacity may be insufficient because the ambient temperature is too high, the nominal value is too low, and/or the water pad is too large (2 water pads). These causes mutually affect each other adversely, meaning at least one cause must be eliminated.
A
Amy NelsonSep 12, 2025
What to do if Hico Medical Systems Medical Equipment connectors are hard to connect?
- M
  Matthew BarrettSep 12, 2025
  If the connectors of your Hico Medical Systems Medical Equipment are hard to connect, it may be because the sealing ring is dry and brittle. Grease the sealing ring with petroleum jelly, silicone grease, or a similar lubricant.
K
Kim BassSep 13, 2025
What to do if Hico Medical Systems Medical Equipment displays alarm and display message: “TEMP.DIFF. > 1°C”?
- D
  Douglas KaneSep 13, 2025
  If your Hico Medical Systems Medical Equipment displays the alarm message “TEMP.DIFF. > 1°C”, it is probably because you connected or disconnected the water pad during operation. Acknowledge the alarm with the “Alarm OFF” key.

Hico Medical Systems HICO-VARIOTHERM 550 Specifications

General

Brand	Hico Medical Systems
Model	HICO-VARIOTHERM 550
Category	Medical Equipment
Language	English

Hico Medical Systems HICO-VARIOTHERM 550 User Manual

Table of Contents

Questions and Answers:

Hico Medical Systems HICO-VARIOTHERM 550 Specifications