CC01-UM-B01-02.12-ENG-01.12.16
G. Zeroizing (Factory Resetting) a coCrypt B:
This zeroize process will reset your coCrypt B to its original factory state. Any data stored in the
device will be lost and cannot be retrieved after the zeroizing process has started. Make sure you
have securely backed up any data information you want to keep prior to starting this zeroizing
process.
You may choose between two methods to perform the zeroizing process:
Method 1:
1. Begin the process using the already installed SIM-card.
2. Press and hold the knob while inserting the coCrypt B into the PC. The text “admin menu”
will show in the display. Remove your finger from the knob.
3. Press the several times until the message «Zeroize coCrypt» is displayed.
4. Press the Enter knob . The display will show “Confirm [Y/N]”.
5. Press the . The «Y» is displayed. Press to confirm.
6. Wait 2-3 seconds until the message “Zeroize completed” shows in the display.
7. Remove the hiddn coCrypt from the computer and then reinsert it. After a few seconds the
display will show the message “Zeroize completed” followed by "Please Restart".
8. Remove the coCrypt B once more from the PC. It will automatically power off.
9. You may continue using the same SIM-card or you may insert a new one from a hiddn Keycard
(see points 1 & 2 in section A).
10. Then follow the regular first time setup procedure in section B.
Method 2:
1. Disconnect coCrypt B from the PC and make sure it is turned off.
2. Press and hold the “3” button and the Enter button down.
3. While holding these two down, press and hold the Power on button down.
4. fter 2-3 seconds, the message “Zeroize completed” shows in the display.
5. Remove the coCrypt from the computer to turn the coCrypt B off. Then reinsert the coCrypt B
into the computer again. It will automatically turn on and after a few seconds the display will
show the message “Zeroize completed” followed by "Please Restart".
6. Remove the coCrypt B once more from the PC. It will automatically power off.
7. You may continue using the same SIM-card or you may now insert a new one from a hiddn
Keycard (see point 1 & 2 in section A).
8. Then follow the regular first time setup procedure in section B.
To Next Page
Loading...