13
Power On & Unlock
Long press to power on/off the display. If you do not use the electric bike for more than 10
minutes, the meter will automatically shut down.
When the display is powered on, it will show the Current Speed (km/h) and Odometer (km) by
default. Short press to switch between Odometer (km), Trip Odometer(km), Maximum Speed
(km/h), and Average Speed (km/h).
In the startup state, the ebike is in the state of no speed,long press and hold , the ebike enters
the walk boost mode,The instrument interface gear is then switched to P mode.Press again to
make the turn off boost mode.The electric bike is in operation,long press and hold , enter
self-propelled cruise mode.In the automatic cruise state, pinch the brake handle or change the gear,
and automatically exit the cruise mode.
The walk boost mode can only be used when pushing the electric bicycle, please do not use it
while riding.
Press the to make the controller turn on the lights.Press again to make the controller turn
off the lights.
Press / to switch gears of the electric bicycle, thus changing the motor output power.
After unlocking, please wear a helmet and protective gear before cycling, and ensure that all
functions of the electric bike are normal before starting your cycling.
After cycling, please press and hold the power button on the instrument panel to turn off the
power.The default password is 0000, which can be set through the Settings menu P18.If you forget the
password, enter 9999 to force the system to start.
To Next Page
Loading...
