Hidoes HD-C1 - Page 12

8
21
Push the rear seat cushion
backward to separate the rear
seat cushion from the hole to
remove the rear seat cushion
20
Insert the seat tube, adjust it to
a proper height, and lock the
quick release handle in the
direction
22
Align the holes in the backrest
with the corresponding holes
23
Tighten the screws on the back
seat to secure the backrest
24
Align the seat cushion hole
with the rear seat hole and
push the seat cushion
forward to lock it
19
By turning the right pedal
clockwise and the left pedal
counterclockwise with your
hand,Use tools to tighten pedal
screws