HIDRIA R18R-091MPS-ET120B-01A02 User Manual

INSTALLATION, MAINTENANCE AND USER'S GUIDE
FAN WITH ELECTRONICALLY COMMUTATED EXTERNAL-ROTOR MOTOR
Fan Code:
0318-4-1006
Fan type : R18R-091MPS-ET120B-01A02
&
Note :
Table of Contents :
01
SAFETY
02
TYPICAL FEATURES AND PROPER USE
03
OPERATING CONDITIONS
04
INSTALLATION AND CONNECTION
05
SPEED CONTROL
06
PUTTING INTO OPERATION
07 DIAGNOSTICS & TROUBLESHOOTING
08
PROTECTIVE FEATURES
09
MAINTENANCE, SERVICE AND CLEANING
10
TRANSPORT AND STORAGE
11
ErP, ROHS AND EMC DIRECTIVES
12
SERVICE ADDRESSES AND ADDITIONAL DATA
This document contains instructions and information for the operation, installation, connection, use and maintenance of
the product. Be sure to familiarize yourself with these instructions before working on this unit. Not paying attention to
these warnings and instructions may lead to malfunctions and failures or may seriously endanger human life. More
detailed information and instructions are available from the manufacturer on request.
Symbols :
WARNING - to indicate warning situation
WARNING - to indicate hot surfaces
DANGER due to electric shock
NOTE - indicate valuable information

HIDRIA R18R-091MPS-ET120B-01A02 Specifications

General

Brand	HIDRIA
Model	R18R-091MPS-ET120B-01A02
Category	Fan
Language	English

Summary

01 Safety

02 Proper Use and Typical Features

03 Operating Conditions

04 Installation and Connection

Mechanical and Electrical Installation

Covers both the physical mounting procedures and electrical connection requirements for safe setup.

05 Speed Control

Speed Control Methods and Adjustment

Details linear voltage input, hysteresis, and input characteristic adjustment for fan speed control.

06 Putting Into Operation

08 Protective Features

Electronic and Thermal Protection

Covers short-circuit, locked-rotor, undervoltage, and over-temperature protections for the motor and electronics.

NFC/RFID Wireless Communication

Enables advanced fan functionality configuration via integrated NFC/RFID tag.

07 Diagnostics & Troubleshooting

Alarm Relay and LED Diagnostics

Interpreting alarm relay status and LED indicators for error conditions and fault detection.

09 Maintenance, Service and Cleaning

Cleaning Procedures

Guidelines for safely cleaning fan components to prevent imbalance and damage.

10 Transport and Storage

11 ErP, RoHS and EMC Directives

12 Service Addresses and Additional Data