To Next PageTo Next Page
Need help?Do you have a question about the HIDRIA 0314-4-0166 and is the answer not in the manual?
Covers mechanical aspects of fan installation, including mounting and air-gap requirements.
Details electrical connection requirements, circuit protection, and cable specifications for the fan.
Explains how to control fan speed using a 0-10V linear voltage input signal.
Describes the hysteresis function to prevent rapid cycling between standby and run modes.
Details how to adjust the fan's input characteristic for optimal system integration.
Illustrates the control diagram for fan speed adjustment based on input voltage.
External protection required for short circuits, as the motor lacks built-in protection.
Automatic electronic shutdown when the rotor is blocked, with restart upon de-blocking.
Describes motor behavior and shutdown under low mains voltage conditions.
Internal thermal overload protector for electronic and motor safety against overheating.
Provides instructions for cleaning the fan, emphasizing safety and proper methods.
General