HIFI WALKER H2 - Bluetooth Connectivity

TF Cards
Access all your music files from here.
OTG
Connect an external USB drive via USB-OTG cable
3. Seng
Press Play/Pause to enter.
You will see:
Music Scan：
Scan the enre Micro SD card and build your music library.
-Automac: Scan will be automacally acvated every me
you insert your Micro SD card.
-Manually: Scan will be acvated only when you manually
ask H2 to scan your Micro SD card.
Press and hold the Menu buon in the Music Scan secon.
Once you release the Menu buon, the player will acvate
music scan.
Equalizer:
Press Play/Press to select your favorite EQ style.
The H2 includes:
- Rock - Classic - Jazz - Pop - Dance - Vocal
- Blues - Heavy Metal - Custome - Off
Play mode：
Press Play/Pause to select your favorite play mode:
-Play in order: Play the enre music library once.
-Single Repeat: Looping the single song.
-Random: Randomly play a song from your enre library
-Repeat all：Looping the enre music library repeatedly
Memory play：
Choose your memory play posion from：
-Last song.
The next me you power on H2, it will start playing from the
beginning of the song you were listening before powered off.
-Last poion
H2 will start playing from the locaon of the song when you
previously powered off.
-Off.
Volume set：
Enter to set the volume.
-Memory: keep using your previous volume.
-Default: the default volume is 30
4. System Seng
Press Play/Pause to enter System Sengs.
You will see:
Language：
The H2 supports Mullanguage:
-English -German -French -Italian
-Japanese-Spanish -Chinese -Korean
Theme
Enter to select Theme A, B or C.
Display
- Backlight me:
a. Press Next/Previous buon to adjust the backlight me.
b. The default me is 30 seconds.
- Brightness
- Idle Shutdown Time;
a. Press Next/Previous to adjust the me to let H2
automacally turn off when no operaon.
b. The default seng is 5 minutesScheduled Power off me
Bluetooth：
The H2 supports bi-direconal (2-way) Bluetooth feature.
You can either use H2 as a portable amplifier to receive
Bluetooth music from your other device or as a sender to
send the music to your Bluetooth speaker.
- Bluetooth scaning: Press Next/Previous to select your target
device. Then, press Play/Pause to connect the device. When
successfully connected, H2 will display “Connected” next to
your Bluetooth device.
- Paired device: Press Next/Previous to see your connected
devices. You can also reconnect your device from here.
- Available devices: you can see all available Bluetooth
devices in here.
Press Play/Pause to turn on the Bluetooth. The H2 will now
scan for Bluetooth devices. It is normal to take few seconds
before successfully connected to your devices. When
scanning, your other Bluetooth devices (e.g., Bluetooth
headphones or speakers) should also be in scanning/pairing
mode.
Congratulaons on purchasing your HIFI WALKER H2
To use HIFI WALKER H2, you put songs and other audio files
on your H2's MicroSD card.
Use H2 to:
-Sync songs and playlists (*.m3u/*.m3u8 format only) for
listening on the go
-Store or back up files and other data, using H2 as an
external disk
What's in the box?
1*HIFI WALKER H2 HIFI Digital Audio Player
1*Micro USB cable
1*HIFI WALKER Hi-Res Earphone A2
1*User Manual
About HIFI WALKER H2
1
Can’t power ON the H2
Press and hold the Power buon for 3 sec. If the status
light does not light up, please charge the player for at least
10 mins and power on again.
If the status light does not light up aer 10 mins of
charging or if the status light does light up but the screen is
dead, please contact our customer support.
Player freezes
Press and hold the Power buon for 8 secs to reset the
device. The status light will be off, and all seng will return
to factory.
Can’t hear music when playing
Check if the volume is too low
Check if your earphone is will plugged and not damaged
Check if your music file is well supported and not damaged
Can’t load music to H2
Check if H2 is correctly connected to your computer
Check if H2 is in [USB Mode] – [USB]
Check if the MicroSD card is correctly inserted and not
damaged
Check if you have music file in the MicroSD card
Can I load and play audible books?
If the books are on your pc / laptop in a compable file
format, then yes
Frequently Asked Quesons
6
Do you get a forced gap between tracks on playback? e.g.
if you are playing a live album do you get interrupve gaps?
There is a gapless opon in the [Music Sengs] menu.
Should the music files be loaded using a folder structure
e.g. Arst or put all the files flat at the root folder?
Either way works. We just suggest folders as it's easier
to navigate.
Is there a song limit?
Yes. the limit is 15000 songs
Can you adjust the volume on the device when using
Bluetooth?
If your headphones are Bluetooth and have volume,
then yes.
My HIFIWalker won't work with my present iTunes...is it
compable?
No, unfortunately it is NOT compable with iTunes. This
funcons more like an external hard drive. You simply plug
it in, an opon to open it as a folder pops up, and you simply
drag and drop your music.
Go to this link as we believe it will answer your queson:
hps://www.lifewire.com/do-i-need-an-ipod-to-play-itunes-
songs-2438427
Does this player have noise cancelling and does it show
HIFIWALKER is the HiFi division of music player maker
Shenzhenshi Letushi Co. Ltd.
Company: Shenzhen Letushi Technology CO., LTD
Official Site: WWW.HIFIWALKER.COM
Facebook：@HIFIWALKER.Official
YouTube：HIFI WALKER
Customer Service: Support@HIFIWALKER.com
About - Beer Sound, Beer Life
7
album art easily? Thanks.
The player itself doesn't have noise cancelling feature but
the earphone included supports passive noise cancelling.
The player does not support any album art.
Has anyone been able to find out if this player will play an
enre SD cards worth of music in the random seng other
than just in track or album?
Yes, it will play the enre collecon of songs in random.
Set the player in random mode then select "songs" rather
than albums or arsts or genres, etc.
When upgrading the SD card, do you have to do anything
extra? Can you simply just add a new card and go?
I would plug the new card into a computer to make sure
it was formaed, if not, format the new SD card. Then plug
it into the HIFI Walker, and down load your music. You could
also plug the SD card into your computer, load the music
onto the SD card, then put the card into the HIFI Walker.
I upgraded to a 256 gb card and just dragged my music
onto it and it kept all the same folder structures and worked
aer popping it in.
What do I need to download my CDs in wav on to this
player?
hp://www.wikihow.com/Copy-CD-to-MP3
Make sure to choose WAV (lossless format) instead of
MP3 format.
Does the Hifi Walker support WPL or other playlist files?
Can you create playlists on a PC and load them into the
SD card?
Our HIFI WALKER H2 does support *.m3u and *.m3u8
playlist files. A player soware foobar(hp://www.foobar
2000.org/) will help you to make those playlist files.
Only *.m3u/*.m3u8 file needs to be at the root folder of
the SD card. The folder contains your target music doesn't
have to be at the root folder.
How can the baery be replaced?
The unit is sealed making baery replacement not
possible.
Does the player have a bookmark?
Yes! The player does have a bookmark. Navigate the menu
to [Music Seng] – [Memory Play] – [Point] to acvate
bookmark. Sorry for the previous info.
Can I just drag my music folder over on the SD card 1600
songs in 1 folder?
You can just drag your music into H2's folder. And yes, the
player recognizes single folders with up to 1600 music files.
Is it possible to create a playlist on the go w/o a computer?
Yes, but you can only add songs to [My favorites]. You
cannot customize the playlist name without a computer.
When would you adjust the gain seng rather than volume?
Thanks!
I have my Gain set on High and use the volume to control
the audio output from zero to max. High seng gives you a
higher out-put should you need it. I think the Gain seng is
to adjust for different headphones used with this player.
Headphone impedance can range from 8 ohms to 64 ohms.
The 8 ohms would be louder at the same gain seng as 64
ohms. I like the flexibility of the controls and input/output
the HiFi Walker has.
Can I stream Spofy, Pandora, etc. from my Android phone
via Bluetooth to this HIFi WALKER H2 to enjoy the sound
quality?
Yes, the H2 supports high quality Bluetooth streaming via
Spofy, Pandora, etc.
HIFIWALKER H2 at a glance
3
1.Power buon
2.Volume Up
3.Volume Down
4.Micro SD card slot
5.Strap mount
6.LCD monitor
7.Previous/Rewind
8.Next/Fast-forward
9.Back
10.Line out port
11.Micro USB port
12.Status light
13.Earphone port
14.Menu buon
15.Play/Pause
16.Scroll wheel
H2
User Manual
Specificaon
5
Seng up HIFIWALKER H2 4
Quick guide
2
1. Baery
Baery will be fully charged in approximately 4 hours on a
wall charger. If charging on a computer or other devices, the
charging me varies as the input differs on each device.
2. Power On/Off
Press and hold the Power buon to turn on the H2. The blue
status light will light up once turned on.
Press and hold to turn off.
3. Lock Mode
Press the Power buon to lock the device. The screen will be
turned off and all buons will be locked except the Power
buon.
4. Reboot the player
If the player freezes, press and hold the Power buon for 8
sec to reboot the player. All sengs will be reset to the
factory sengs.
1. Category
Press Play/Pause to enter the Music Category.
You will see:
Songs：
Press Next/Previous to select music file and press Play/Pause
to play
My favorite：
You will see your favorite music from here
Playlist:
Your *.m3u playlist file will be displayed from [Explorer], not
here. We apologize for the misleading menu tle. This will be
deleted from the [Category] and will be moving to [Explorer]
in the next firmware update.
Recent played songs：
Records of 50 most recent played songs will be shown in here
Album (ID3 tag info required) ：
Enter to select your favorite Album.
Genre (ID3 tag info required) ：
Enter to select your favorite Genre.
Arst (ID3 tag info required) ：
Enter to select your favorite Arst.
Clear record:
All records under [Category] will be deleted. Audio files will
not be affected.
2. Explorer
Press Play/Pause to enter the Explorer.
You will see:
Gain：
Press Play/Pause to select
- High gain output
- Low gain output
This is to ensure you have the best experience when paring
H2 with earphones, headphones, or amplifier.
The default seng is low.
Replay Gain
- Track: Volume will be the same for all music files.
- Album: Volume will be the same within each album.
Balance：
Press Previous or Next to adjust the le and right channel
balance.
Lyric：
The default seng is On.
The name of *.lrc file and the music file must be the same.
For e.g., you should have testsong111.lrc and testsong111.
mp3 or testsong111.wav or testsong111.flac or testsong111.
ape to successfully display the lyric.
Album cover:
Press Play/Pause to turn on the album cover
Gapless：
Press Play/Pause to turn on the gapless play.
The default seng is Off.
Note: Bluetooth streaming does not support DSD audio
files.
-Bluetooth steaming output
-Bluetooth streaming input from your smartphone or other
Bluetooth device.
Once your smartphone is connected, there will be a big
Bluetooth logo showing in the middle of the screen. You can
then be listening to music from H2 with wired earphone.
Note: You cannot send the Bluetooth signal to your
Bluetooth speaker when the H2 is connected to your phone.
High quality: Turn it on to enable high quality Bluetooth
streaming. Reboong the player is required.
aptX: Qualcomm® aptX™ audio technology enhances the
wireless sound quality of many of the world's finest
smartphones, speakers, headphones and tablets.
Bluetooth ps：
Since your HIFI WALKER H2 is built with premium metal
materials, the metal body may affect your Bluetooth range.
To maximize your Bluetooth experience, make sure to have
the back of the body towards your target Bluetooth device
(headphones/speakers). Obstrucons such hands may also
affect the Bluetooth range.
Please keep those ps in mind to reach opmal Bluetooth
experience.
USB mode：
Select [USB] to connect the device to your PC or MAC. Please
ignore the DAC as it will be disconnued in the future
firmware update.
Font Size:
Press Play/Pause to change the size from [Small], [Medium]
to [Big]
Factory Reset：
Select to reset to factory seng
Firmware update：
a. Download the newest firmware “update.upt” and copy it
to the root directory of the microSD card.
b. Select “Yes” to update.
Please Note: File System must be FAT32 to successfully
upgrade the firmware, exFAT file system is also supported
when not upgrading the firmware.
About the player
-Version: The current firmware version.
-Memory: You can see the used and remaining memory
storage.
About the Play: Here you can find our company and contact
info
Model
Dimensions
Product Weight
Display
Baery
Audio
Specs
THD
Note: DTS coded WAV files are not supported. The audio compression
level of extra high supports up to 96K; the audio compression level of
insane is not supported.
SNR
Frequency Response Range
Nominal Impedance
Headphone Port
<0.008%
103dB@1KHz，±2dB
20Hz-20KHz
8 ~ 150 Ohm
3.5mm Port
Supported Audio File
Format
DSF（2.8MHz/ 1bit）（DSD）
DFF（ 2.8MHz/ 1bit）（DSD）
WAV (192KHz/64bit)
APE (192KHz/24 bit)
FLAC（192KHz/24bit）
MP3（48KHz/16bit）
WMA (192KHz/24bit)
OGG(48KHz/16bit)
Aif（Aiff） (384KHz/32 bit)
AAC（48KHz/16bit）
H2
90*55*15mm
152g
2.0 Inches 320*240 TFT Display
1300mAH/3.7V Li-ion Baery
Micro USB 5V/1A Input
list_cycle list_play ramdom_play single_cycle single_play