Need help?Do you have a question about the Hifonics Taurus X and is the answer not in the manual?
Describes the amplifier's performance and provides advice on safe listening levels.
Details mounting location, wire lengths, and securing the amplifier for optimal performance and reliability.
Warns users to check vehicle layout and wiring before drilling or cutting to avoid hazards.
Explains the amplifier's protection feature and troubleshooting steps for shutdown conditions.
Details connecting the +12V wire to the battery terminal, including fusing requirements.
Explains securing the ground wire to the vehicle chassis for proper electrical grounding.
Describes connecting the remote turn-on wire to the radio or antenna relay.
Warns against connecting speaker negative terminals to ground or chassis.
Illustrates main power and signal input connections for the amplifier.
Explains using RCA cables for low-level inputs and connecting to the radio's output.
Shows how to connect speakers in stereo and bridged modes.
Details RCA line output, low level input jacks, and their functions.
Explains input level, high pass, low pass crossover, and sub boost controls.
Describes power, protect indicators, and the importance of the fuse.
Details power, remote, and speaker terminal connections.
Lists power output ratings for different impedance and frequency conditions.
Details frequency response range and variable crossover frequencies.
Specifies input sensitivity, impedance, signal-to-noise ratio, and damping factor.
Provides dimensions, fuse rating, and noise level warnings.
To Next Page
General