Need help?Do you have a question about the Hifonics Thor Series and is the answer not in the manual?
Covers general advice for safe installation, operation, and handling of the audio device.
Details the physical mounting process for the amplifier in a vehicle.
Explains the wiring process for power, ground, remote, speakers, and fuse.
Details the various inputs, outputs, and indicator LEDs on the amplifier.
Explains the functions and operation of the included remote controller with LED display.
Guides on installing the M-CONTROL software on a computer for amplifier configuration.
Guides on configuring amplifier settings via the M-CONTROL software.
Explains the layout and functions of the M-CONTROL software graphical user interface.
Illustrates a 6-channel, 3-way active system wiring diagram and configuration steps.
Provides specific crossover and filter settings for tweeters, midbass, and kickbass speakers.
Covers volume adjustment, equalizer, delay, phase, saving and transferring DSP settings.
Summarizes common system configurations and wiring examples for the DSP amplifier.
Lists technical details, power output, frequency range, impedance, and software requirements.
Addresses issues caused by electrical noise and provides wiring advice to prevent them.
Explains the amplifier's protection circuit and general warnings for modern vehicles.
Provides guidance for installing the amplifier in vehicles with advanced electronic systems.
Lists common issues like no function, no signal, distortions, and protection mode with their solutions.
To Next Page
General