Need help?Do you have a question about the Hifonics Brutus BX1500D and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Power Output (Peak) | 3000W |
| Frequency Response | 10 Hz - 250 Hz |
| Signal to Noise Ratio | >95dB |
| THD at Rated RMS Power | < 0.01% |
| Bass Boost | 0 - 12 dB |
| Subsonic Filter | 10 Hz - 50 Hz |
| Input Sensitivity | 200mV - 6V |
| Efficiency | > 85% |
| RMS Power at 4 Ohms | 500W |
| RMS Power at 2 Ohms | 1000W |
| RMS Power at 1 Ohm | 1500W |
| Phase Shift | 0-180° |
Details general features of the Brutus Series amplifiers, including input sensitivities and crossover filters.
Explains basic application scenarios for mono amplifiers, including wiring and crossover settings.
Lists output power for each model at different impedance loads (4, 2, and 1 Ohm).
Covers electrical specs like damping factor, THD, input impedance, and mechanical details like dimensions.
Provides essential tips for system design, wiring, power, and ground connections for optimal performance.
Guides on setting level controls, crossover frequencies, and equalizers for optimal sound quality.
Explains how to diagnose and resolve common problems like amplifier overheating, low output, and noise.
Outlines the terms, conditions, and limitations of the Maxxsonics limited warranty for the amplifiers.
To Next Page
