EasyManua.ls Logo

Hifonics Generation X Boltar User Manual

Hifonics Generation X Boltar
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Hifonics Generation X Boltar and is the answer not in the manual?

Hifonics Generation X Boltar Specifications

General IconGeneral
Channels1
Signal-to-Noise Ratio>95dB
Input Sensitivity0.2V - 6V
Bass Boost0 - 18 dB
Phase Shift0~180°

Summary

Introducing the Generation X Amplifiers

Generation X Amplifier Models

Lists the different amplifier models available in the Generation X series.

Generation X Amplifier Specifications

Description of Generation X Technology Features

Parallel Output System

Explanation of the Parallel Output System technology for amplifier configuration.

Chameleon System Design

Details the modular Chameleon System for versatile audio setups.

Stealth Tracking

Explanation of the Stealth Thermal Tracking system for amplifier protection.

Using the 2WX-2 with Two 2-Channel Amplifiers (Mono P.O.S. Mode Bass in a Bi-Amplified System)

Generation X Chameleon System: An Overview

Module Installation

Detailed steps for installing Chameleon system accessory modules.

Generation X Chameleon System: Module PARA-1

PARA-1 Module Description of Controls

Explanation of the functions of each control on the PARA-1 module.

Equalizer Setup

Guides on how to set up the parametric equalizer for optimal audio.

Generation X Chameleon System: Module 2WX-2

2WX-2 Module Description of Controls

Explanation of the functions of each control on the 2WX-2 module.

Generation X Chameleon System: Module MFX-3

MFX-3 Module Description of Controls

Generation X Chameleon System: Module 4CHX-4

4CHX-4 Module Description of Controls

Changing the Frequency Select Resistor Packs

Using the PARA-1 Equalizer with 2 Channel Amplifiers

Using the 2WX-2 with Two 2-Channel Amplifiers (Stereo Bass in a Bi-Amplified System)

Using the 2WX-2 with Two 2-Channel Amplifiers (Mono Bridged Bass in a Bi-Amplified System)

Troubleshooting a Faulty System

Noise Problems Diagnosis and Remedy

Addresses noise issues and their solutions.

Low Power Diagnosis and Remedy

Covers low power output problems and their fixes.

Blown Fuses Diagnosis and Remedy

Explains causes and solutions for blown fuses.

Diagnostic System Turns Off Amplifier Diagnosis and Remedy

Troubleshoots amplifier shutdowns and their remedies.

Using the PARA-1 Equalizer with the Mono Amplifier (Son of Colossus)

Using the PARA-1 Equalizer with 4-Channel Amplifiers in Dual Stereo Mode

Using the PARA-1 Equalizer with 4-Channel Amplifiers in Dual P.O.S. Mode

Using the 2WX-2 with One 2-Channel Amplifier and a Mono Amplifier for Bass

Using the 2WX-2 with Three 2-Channel Amplifiers (Stereo Bass in a Three Way System)

Using the 2WX-2 with Three 2-Channel Amplifiers (Mono Bridged Bass with Mono P.O.S. Bass Option)

Frequency Module Choices

Using the MFX-3 with Two 2-Channel Amplifiers and a Mono Amplifier (4-Channel/Mono Front/Rear Bi-Amplified System with Constant Non-Faded Subbass)

Using the MFX-3 with Two 4-Channel Amplifiers with P.O.S. Mono Bridged Subbass in a Front Bi-Amplified System with Constant Non-Faded Subbass

Using the 2WX-2 with a 4 Channel Amplifier (Stereo Bass in a Bi-Amplified System)

Using the 2WX-2 with a 4 Channel Amplifier (Mono Bridged Bass)

Using the MFX-3 with Three 2-Channel Amplifiers (Mono Subbass)

Using the MFX-3 with Two 2-Channel Amplifiers and a Mono Amplifier (Front/Rear Bi-Amplified System with Constant Non-Faded Subbass)

Using the 4CHX-4 with a 4-Channel Amplifier and a 2 Channel Amplifier for Mono Subbass in a FF Bi-Amplified System with Constant Non-Faded Subbass

Using the 4CHX-4 with Two 2-Channel Amplifiers with Mono Subbass in a Bi-Amplified System

Warranty on Generation X Amplifiers

Warranty Claim Procedure

Steps to follow for obtaining warranty service for defective products.

Related product manuals