Need help?Do you have a question about the Hifonics ZEUS POWER and is the answer not in the manual?
General| S/N Ratio | >95dB |
|---|---|
| Phase Shift | 0-180 Degrees |
| Series | ZEUS |
| Frequency Response | 10Hz |
| Input Sensitivity | 0.2V - 6V |
| Crossover | 50Hz - 250Hz |
| Subsonic Filter | 10Hz |
| Bass Boost | 0-12dB |
Details amplifier model, power output, impedance, frequency range, damping factor, THD+N, and input sensitivity.
Guidelines for mounting the amplifier, ensuring air circulation and avoiding vehicle component damage.
Connect the GND terminal to a suitable ground point on the vehicle's chassis for a safe connection.
Connect REM IN/OUT terminal to the head unit's turn-on signal for amplifier activation.
Connect the +12V terminal to the vehicle's battery +12V pole with a suitable cable.
Install the supplied 100A fuse in the power cable between the battery and amplifier, max 30 cm.
Troubleshooting steps for when the amplifier's power LED is off, checking fuses and connections.
Diagnosing issues when the power LED is on but no sound is produced from speakers.
Diagnosing the protective circuit activation and the Protect LED status.
To Next Page