Need help?Do you have a question about the Hifonics Zeus ZRX1000.4 and is the answer not in the manual?
Discusses system design principles for car audio.
Covers physical mounting and wiring considerations for amplifiers.
Details features including crossover, bass EQ, and input/output for 2-channel models.
Explains features including mode switch and dual controls for 4-channel models.
Outlines features for mono D-Class amps, including subsonic and low pass controls.
Details the full range stereo application for 2-channel amplifiers.
Explains the mono bridging application for 2-channel amplifiers.
Describes the 4-channel full range system setup.
Covers 2 or 3 channel system configurations using 4-channel amps.
Explains system setup with front/rear highs and mono sub.
Details the basic application for 1-channel mono D-Class amplifiers.
General guidelines for setting up 2 and 4-channel amplifiers.
Adjusting levels for multi-way active systems.
Specific setup instructions for 1-channel mono D-Class amps.
Explains the amplifier's protection system and LED indicators.
Discusses causes and solutions for amplifier overheating.
Addresses issues related to low amplifier output power.
Explains common reasons for amplifier fuse blowing.
Guides on troubleshooting systems that fail to power on.
Covers troubleshooting hiss and electrical interference.
Explains the MaxxTech system labeling and performance levels.
To Next Page
General