Need help?Do you have a question about the Hifonics BRUTUS BRZ1200.1D and is the answer not in the manual?
Discusses system design, amplifier mounting, and wiring considerations.
Details on gauge wire, fuse placement, and secure ground connections.
Explains how to connect RCA, speaker, power, ground, and remote wires.
Step-by-step guide for safely powering on the installed system.
Explains the function of each control and LED on the amplifier panels.
Details on Line Input/Output, Level, Subsonic, Bass EQ, Low Pass, Phase Shift, Power/Protect.
Illustrates connecting a single subwoofer to the amplifier.
Shows how to connect two subwoofers in parallel.
Illustrates connecting a single subwoofer to the amplifier.
Shows how to connect two subwoofers in parallel.
Details for installing and connecting a single amplifier to subwoofers.
Instructions for linking two amplifiers for increased power or multiple subwoofers.
Guidance on setting crossover frequencies for optimal bass response.
Tips for adjusting bass boost and phase for desired sound.
How to match amplifier input sensitivity to the head unit output level.
Explains the amplifier's built-in diagnostic and protection features.
Addresses overheating, low power, blown fuses, no power, and noise problems.
Details output power across different impedances for each model.
Lists specifications like dampening factor, SNR, and protection circuits.
Details crossover capabilities and available input/output connectors.
Outlines what is covered, for how long, and what is excluded.
Explains how the Maxx-Link allows linking amps and its advantages.
Describes the specific features and controls of the MLX-100 unit.
Details the MX-1 for converting high-level speaker outputs to RCA.
Describes the MX-3 for controlling bass levels and shaping.
Details the MX-2 for converting high-level speaker outputs to RCA.
Details the MX-4 for adding subwoofers via high-level inputs.
To Next Page
General