Need help?Do you have a question about the Hifonics Brutus BRX12000D and is the answer not in the manual?
General| Impedance | 1 Ohm |
|---|---|
| Frequency Response | 10 Hz - 250 Hz |
| Dimensions | 22.5" x 10.5" x 2.5" |
| Channels | 1 |
| Total Harmonic Distortion (THD) | < 1% |
| Bass Boost | 0-12dB |
| Phase Shift | 0 - 180 degrees |
| Power Output (Peak) | 12000 Watts |
| Input Sensitivity | 0.2V - 6V |
Adherence to operational guidelines for safe use and maintenance.
Ensuring safe and proper installation practices for wiring and component placement.
Guidelines for handling device components and recommended installations.
Keeping small parts away from children to prevent ingestion injuries.
Step-by-step guide for physically mounting the amplifier in the vehicle.
Details on connecting power, ground, and remote turn-on signals.
Overview and explanation of the amplifier's front panel controls and features.
Wiring diagram for connecting the amplifier in normal subwoofer operation mode.
Wiring configurations for master/slave amplifier setups with multiple units.
Diagrams for connecting single/dual voice coil and multiple subwoofers.
Visual guide to adjusting various filter settings like Level, Sub Sonic, LP, Phase, etc.
Technical details and output power ratings of the amplifier.
Information regarding the product warranty and coverage.
Common causes and solutions for electrical interference issues.
Explanation of the amplifier's protection circuit and LED indicators.
Considerations for installing and operating in modern vehicles with complex electronics.
Troubleshooting common issues like no function, no signal, distortion, or noise.
Details on the recommended premium wire kit for installation.
Information on optional balanced input transmitters for improved signal integrity.
To Next Page