Need help?Do you have a question about the Hifonics Zeus ZXi8006 and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| Total Harmonic Distortion (THD) | <0.05% |
| Signal-to-Noise Ratio | >95dB |
| Input Sensitivity | 200mV - 6V |
| Crossover Frequency | 50Hz - 250Hz |
| Operating Voltage | 10V - 16V |
| Crossover Type | Variable High-Pass/Low-Pass |
| Bass Boost | 0dB - 12dB @ 45Hz |
Details proper gauge wire selection and connection methods for power and ground.
Implementing a 2-way active system using channels for highs and bass.
Bi-amplified system setup with front/rear channel control for highs and bass.
System combining front/rear highs with a 2-channel amp for mono sub bass.
Explains the diagnostic system and PROTECT LED indicators.
Discusses causes and solutions for amplifier overheating.
Addresses low output power, fuse issues, and no power conditions.
To Next Page