Handheld Thermography Camera User Manual
22
Figure 5-3 View Files
Note
● When you are viewing the videos or capture snapshots, you can switch the file by tapping
or .
● When you are viewing the snapshots, You can tap to play the sound. Refer to Connect
Bluetooth to set the bluetooth.
● For more information contained in capture snapshots or videos, you can install the HIKMICRO
Analyzer to analyze them. You can get the thermography client software from the disk packed
in box.
5.4 Export Files
Connect the device to your PC with supplied cable, you can export the recorded videos and
captured snapshots.
Steps
1. Open the cover of cable interface.
2. Connect the device to your PC with cable and open the detected disk.
3. Select and copy the videos or snapshots to PC to view the files.
4. Disconnect the device from your PC.
Note
For the first time connection, the driver will be installed automatically.
What to do next
You can import the captured snapshots to HIKMICRO Analyzer for further data analysis. See the
User Manual of HIKMICRO Analyzer (embedded in the client software, Help → User Manual) for
the operation guide.
To Next Page
Loading...
Need help?
General
