Need help?Do you have a question about the Hikmicro STELLAR Series and is the answer not in the manual?
General| Pixel Size | 12 μm |
|---|---|
| Frame Rate | 50 Hz |
| Wi-Fi | Yes |
| Video Recording | Yes |
| Photo Capture | Yes |
| Resolution | 384x288, 640x512 |
| Display | AMOLED |
| Battery Type | Rechargeable Li-ion |
| Operating Temperature | -20°C to +50°C |
| Lens Options | 19mm, 25mm, 35mm, 50mm |
| Focus | Manual |
| Color Palettes | Black Hot, White Hot, Red Hot, Fusion |
Provides a comprehensive overview of the HIKMICRO STELLAR Thermal Image Scope's capabilities and design.
Details the core functionalities including distance measurement, hot tracking, zeroing, and software connection.
Illustrates and identifies the physical buttons and components of the thermal scope.
Explains how to connect the device via Type-C cable for charging or data transfer.
Guides users through the process of installing both internal and external batteries.
Covers the correct procedures for powering the device on and off, including countdown details.
Describes how to navigate the device's menu system using the control wheel.
Details how to check and upgrade the device's firmware via HIKMICRO Sight app or PC.
Introduces the zeroing function for accurate reticle alignment with target.
Instructions on adjusting the diopter for a clear eyepiece view.
Steps to adjust the focus ring for a sharp image.
Explains how to modify image brightness for optimal viewing in different modes.
Details the process for adjusting image contrast.
Guide on selecting appropriate scene modes to enhance display effects.
Information on choosing different color palettes for image display.
Procedure for correcting dead or stuck pixels on the display.
Covers the function of correcting display non-uniformity.
Instructions on enabling or disabling the Picture-in-Picture feature.
Details on how to adjust the digital zoom ratio for magnification.
Explains how to manage and select reticle settings for different users.
Guide on selecting reticle type, color, and position.
Procedure for adjusting reticle position for accurate aiming.
Allows users to customize On-Screen Display information.
Instructions for displaying the HIKMICRO brand logo on the screen.
Explains how to enable burn-prevention to protect the sensor.
Covers capturing pictures and recording video, including audio settings.
Details how to detect and mark the hottest spot in the scene.
Guide on exporting captured pictures and recorded videos to a PC.
Steps to synchronize the device's time and date.
How to select the preferred language for the device interface.
Options to switch units for fusion level and distance measurements.
Instructions for viewing device details like version and serial number.
Procedure to reset the device to its factory default settings.
Troubleshooting steps for a blank or off monitor.
Advice on adjusting the image clarity, referencing diopter settings.
Common issues and checks for capture or recording failures.
Troubleshooting guide for PC connection and device recognition issues.
Information on accessing device serial port commands via QR code.
Details on device communication ports via QR code.
To Next Page