Thermal Image Scope User Manual
22
6.4.3 Record Video
Steps
1. In the live view mode, hold and start recording.
Figure 6-2 Start Recording
The left top of image displays the information of recording time.
2. Hold again to stop recording.
What to do next
For exporting recording files, refer to
Export Files.
6.4.4 Prerecord Video
After enabling this function, the device can automatically record the 7 seconds before and after
the recoil-activation.
Steps
1. In the live view mode, hold the wheel to show the menu.
2. Rotate the wheel to select .
3. Press the wheel to switch the on/off mode this function.
4. Hold the wheel to save and exit.
Note
If you activate recoils continuously, the device will record the 7 seconds before the first recoil
until the 7 seconds after the last recoil.
What to do next
For exporting recording files, refer to
Export Files.
To Next Page
Loading...
