Need help?Do you have a question about the Hikmicro MINI1 and is the answer not in the manual?
Information regarding the manual's content, updates, and professional guidance.
Acknowledges HIKMICRO and other trademarks and logos.
States the product is provided 'as is' with no warranties and limits liability.
Explains FCC compliance, rules, and potential interference.
Specifies the two conditions under which the device complies with FCC rules.
Details the product's compliance with EU directives (EMC, RoHS, WEEE).
Specifies recommended operating temperature, humidity, and environmental conditions.
Procedures to follow in case of smoke, odor, or noise from the device.
Information regarding the manual's content, updates, and professional guidance.
Acknowledges HIKMICRO and other trademarks and logos.
States the product is provided 'as is' with no warranties and limits liability.
Explains FCC compliance, rules, and potential interference.
Specifies the two conditions under which the device complies with FCC rules.
Details the product's compliance with EU directives (EMC, RoHS, WEEE).
Specifies recommended operating temperature, humidity, and environmental conditions.
Procedures to follow in case of smoke, odor, or noise from the device.
The HIKMICRO Smartphone Module is a thermal imaging device designed to connect with your mobile phone via a Type-C interface. It is equipped with an IR detector and utilizes thermal imaging technology to allow users to view targets, detect temperature, capture pictures, and record videos through the HIKMICRO Viewer mobile app. This module is characterized by its small size, portability, and low power consumption, making it suitable for various applications, including use in homes, buildings, and HVAC systems.
To operate the device, users first need to download and install the HIKMICRO Viewer mobile app on their smartphone. Once the app is installed, the module can be connected to the mobile phone using the Type-C interface. After establishing the connection, the app can be launched to begin operation, enabling access to its thermal imaging functionalities.
The device comes with important legal information and acknowledgements. It is manufactured by Hangzhou Microimage Software Co., Ltd., and all rights are reserved. The manual provides instructions for using and managing the product, with all pictures, charts, images, and other information serving descriptive and explanatory purposes only. The information in the manual is subject to change without notice, due to firmware updates or other reasons. Users are advised to find the latest version of the manual on the HIKMICRO website (www.hikmicrotech.com/). It is recommended to use this manual with the guidance and assistance of professionals trained in supporting the product.
HIKMICRO and its associated trademarks and logos are the properties of HIKMICRO across various jurisdictions, while other trademarks and logos mentioned belong to their respective owners.
A legal disclaimer states that, to the maximum extent permitted by applicable law, the manual and the product (including its hardware, software, and firmware) are provided "as is" and "with all faults and errors." HIKMICRO disclaims all warranties, express or implied, including without limitation, merchantability, satisfactory quality, or fitness for a particular purpose. The use of the product is at the user's own risk. HIKMICRO will not be liable for any special, consequential, incidental, or indirect damages, including loss of business profits, business interruption, loss of data, corruption of systems, or loss of documentation, whether based on breach of contract, tort (including negligence), product liability, or otherwise, in connection with the use of the product, even if HIKMICRO has been advised of the possibility of such damages or loss.
Users acknowledge that the internet inherently carries security risks, and HIKMICRO will not be responsible for abnormal operation, privacy leakage, or other damages resulting from cyber-attacks, hacker attacks, virus infections, or other internet security risks. However, HIKMICRO commits to providing timely technical support if required. Users agree to use the product in compliance with all applicable laws and are solely responsible for ensuring that their use conforms to these laws. Specifically, users are responsible for ensuring that their use of the product does not infringe on the rights of third parties, including rights of publicity, intellectual property rights, or data protection and other privacy rights. The product must not be used for any prohibited end-uses, such as the development or production of weapons of mass destruction, chemical or biological weapons, activities related to nuclear explosives or unsafe nuclear fuel-cycles, or in support of human rights abuses. In case of any conflict between the manual and applicable law, the latter prevails.
Regulatory information includes FCC compliance. Users are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void their authority to operate the equipment. The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), users are encouraged to try to correct the interference by one or more of the following measures: reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the user's body.
FCC Conditions state that the device complies with part 15 of the FCC Rules, and its operation is subject to two conditions: it may not cause harmful interference, and it must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement indicates that the product and, if applicable, its supplied accessories are marked with "CE" and comply with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. The 2012/19/EU (WEEE directive) symbol signifies that products marked with it cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, users should return the product to their local supplier upon purchasing equivalent new equipment or dispose of it at designated collection points. More information is available at www.recyclethis.info.
The 2006/66/EC (battery directive) states that the product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. Users should refer to the product documentation for specific battery information. The battery is marked with a symbol that may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, the battery should be returned to the supplier or a designated collection point. More information is available at www.recyclethis.info.
Safety instructions are provided to ensure correct product usage and prevent danger or property loss. The use of the product must strictly comply with local electrical safety regulations.
For transportation, the device should be kept in its original or similar packaging. All wrappers should be retained for future use, as the device may need to be returned to the factory in its original packaging if a failure occurs. Transportation without the original wrapper may result in device damage, for which the company will not be responsible. The product should not be dropped or subjected to physical shock, and it should be kept away from magnetic interference.
Maintenance guidelines state that if the product does not work properly, users should contact their dealer or the nearest service center. The manufacturer will not assume responsibility for problems caused by unauthorized repair or maintenance. The device should be wiped gently with a clean cloth and a small quantity of ethanol, if necessary. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.
Regarding the using environment, users must ensure that the running environment meets the device's requirements. The operating temperature should be between 15°C to 35°C (59°F to 95°F) or 0°C to 40°C (32°F to 104°F), and humidity should be between 5% to 90%. The device should be placed in a dry and well-ventilated environment. It should not be exposed to high electromagnetic radiation or dusty environments. Users must also avoid aiming the lens at the sun or any other bright light.
In case of an emergency, if smoke, odor, or noise arises from the device, users should immediately turn off the power, unplug the power cable, and contact the service center.
The manufacturer's address is Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou, Zhejiang 310052, China, for Hangzhou Microimage Software Co., Ltd.
A compliance notice states that thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom, and/or other member countries of the Wassenaar Arrangement. Users are advised to consult their professional legal or compliance expert or local government authorities for any necessary export license requirements if they intend to transfer, export, or re-export the thermal series products between different countries.
General| Resolution | 256 x 192 |
|---|---|
| IR Resolution | 256 x 192 |
| Frame Rate | 25 Hz |
| Battery Life | Up to 4 hours |
| NETD | < 50 mK |
| Pixel Size | 12 μm |
| Lens | Fixed |
| Storage | MicroSD Card |
| Battery Type | Rechargeable Li-ion |
| Power Consumption | 3 W |
| Sensor Type | Uncooled VOx Microbolometer |
| Spectral Range | 8 to 14 μm |
| IP Rating | IP54 |
| Field of View | 25° × 19° |
| Temperature Range | -20°C to 350°C |
| Accuracy | ±2°C or ±2% |
| Image Modes | Thermal, Fusion, PIP |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Display | 3.5 inch LCD |
| Storage Temperature | -20°C to 60°C |
To Next Page