HIKOKI C 10RJ - User Manual

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
BEFORE operating the power tool. Please keep this manual available for other users and owners before
they use the power tool. This manual should be stored in safe place.
Model Table SawC 10RJ (X)

Summary

Symbols

Safety Instructions

General Power Tool Safety

General safety guidelines for power tool operation.

Electrical Safety

Precautions for safe electrical connection and usage.

Personal Safety

Essential personal protective equipment and safe practices.

Work Area Safety

Guidelines for maintaining a safe and clean work environment.

Safety Instructions

Sawing Procedure Safety

Specific safety instructions for various sawing operations.

Kickback Prevention

Explains kickback hazards and methods to prevent them.

Power Tool Use and Care

Proper usage, maintenance, and storage of power tools.

Safety Instructions

Table Saw Operating Procedures

Warnings and procedures for operating the table saw safely.

Additional Safety Instructions

Supplementary safety guidelines for table saw use.

Glossary of Terms

Overview

Specifications

Loose Parts

Assembly

Unpacking Your Table Saw

Steps and precautions for safely unpacking the table saw.

You Will Need

Lists tools and items required for assembly.

Assemble the Stand

Detailed instructions for assembling the saw's stand.

Assembly

Open the Stand

Guide for unfolding and setting up the saw's stand.

Assembly

Secure;Level the Stand

Steps to ensure the stand is stable and level for safe operation.

Assembly

Table Insert Handling

Procedures for removing, replacing, and aligning the table insert.

Riving Knife Installation

Instructions for installing the riving knife for safe cutting.

Assembly

Blade Removal and Installation

Step-by-step guide for blade removal and installation.

Anti-Kickback Pawls Installation

How to install anti-kickback pawls for safety.

Assembly

Blade Guard Installation

Instructions for correctly installing the blade guard.

Assembly

Outfeed Support Installation

Guide for attaching the outfeed support.

Rip Fence Installation

Steps to install and position the rip fence.

Assembly

Mitre Gauge Installation

How to install the mitre gauge for angled cuts.

Storing Saw Accessories

Guidance on storing saw accessories when not in use.

Assembly

Folding the Stand

Instructions for folding the stand for storage or transport.

Connect to a Dust Collection System

Operation

Applications

Lists the intended uses and materials for the table saw.

Operating Components

Overview of the main parts and their functions during operation.

Causes and Precautions of Kickback

Explains kickback hazards and methods to prevent them.

Operation

Switch and Overload Protection

How to operate the power switch and overload reset.

Changing Blade Depth

How to adjust the cutting depth of the saw blade.

Operation

Changing Blade Angle (Bevel)

Steps to adjust the blade's bevel angle.

Rip Fence Operation

Details on using and adjusting the rip fence.

Operation

Mitre Gauge and Outfeed Support

How to use the mitre gauge and outfeed support.

Push Stick and Through Cuts

Importance of push stick and safety for through cuts.

Operation

Cutting Tips

Helpful advice for achieving better cutting results.

Making Basic Cuts (Cross;Rip)

Guides for performing cross and rip cuts.

Operation

Making Mitre and Bevel Cuts

Guides for performing mitre and bevel cross cuts.

Making Bevel Rip Cuts

Step-by-step guide for performing a bevel rip cut.

Operation

Advanced Cuts (Compound;Panel;Non-Through)

Guides for compound, panel, and non-through cuts.

Dust Collection System

How to connect and maintain the dust collection system.

Adjustments

Aligning Rip Fence to Blade

How to ensure the rip fence is parallel to the saw blade.

Bevel Adjustment

Steps to check and adjust the blade's bevel angle stops.

Adjustments

Rip Fence Scale Indicator Adjustment

Calibrating the rip fence scale indicator for accuracy.

Bevel Indicator Adjustment

How to align the bevel indicator with the scale.

Maintenance

General Maintenance

Routine cleaning and checks for the table saw.

Lubrication

Information about lubrication requirements for the tool.

Service and Repairs

Guidelines for professional servicing and repairs.

Storage

Proper procedures for storing the table saw.

Troubleshooting

Selecting Accessories

Guarantee

HIKOKI C 10RJ Specifications

General

Motor Power	15 Amps
Bevel Capacity	0-45°
Weight	47.5 lbs
Voltage	120V
Blade Diameter	10 inches
Cutting Capacity (Horizontal)	254 mm
Arbor Size	5/8 in
Max Rip Right	330 mm
Max Rip Left	100 mm
Max Depth of Cut at 90 Degrees	85 mm
Table Size	22 x 28 inches