To Next Page
S
Sara BurchAug 4, 2025
What to do if my HIKOKI C 10RJ will not start?
- SScott YoungAug 4, 2025
If your HIKOKI Saw won't start, possible causes include an overload trip. Allow the motor to cool down, then reset it by pushing the overload reset switch. Other potential issues: the saw might not be plugged in, so ensure it is properly connected. A blown fuse or tripped circuit breaker could also be the culprit, in which case you should replace the fuse or reset the breaker. Finally, a damaged cord could prevent the saw from starting; have the cord replaced by an Authorized Service Center.
General
