Need help?Do you have a question about the HIKOKI DB 3DL2 and is the answer not in the manual?
Safe operation practices for the work environment, keeping it clean, well-lit, and free from hazards.
Precautions to prevent electric shock, including plug matching, avoiding wet conditions, and proper cord use.
Guidelines for operator safety, including alertness, PPE, preventing unintentional starts, and proper attire.
Best practices for operating, maintaining, and storing power tools to ensure safety and longevity.
Proper procedures for charging, using, and storing battery packs to prevent hazards.
Guidelines for maintaining the power tool and ensuring its safe operation through qualified repair.
Ensure the drilling area is free from hidden obstructions like wires, water, or gas pipes to prevent accidents.
Avoid operating at speeds exceeding the drill bit's rating to prevent bending and injury.
Begin drilling at low speed with the bit tip in contact with the workpiece for better control.
Apply pressure directly in line with the bit, avoiding excessive force to prevent breakage or loss of control.
Ensure the work area is clear of hidden obstructions before drilling to prevent electric shock or leaks.
Hold the tool securely during operation to prevent accidents or injuries.
Clamp the workpiece using devices or a vice for a more secure hold than hand-holding.
Verify the work environment is suitable by following provided precautions.
Prevent foreign matter from entering the battery connection port for proper functionality.
Never disassemble the rechargeable battery and charger to avoid hazards.
Avoid short-circuiting the battery to prevent overheating, burns, or damage.
Do not dispose of batteries in fire as they may explode; return exhausted batteries to the point of purchase.
Do not insert foreign objects into charger ventilation slots to prevent electrical shock or damage.
Ensure attachments are firmly installed in the anvil to prevent them from coming loose and causing injury.
Confirm the switch is off when changing rotational speed to prevent gear damage.
Use the clutch dial correctly between specified numerals to prevent damage.
If the motor stops due to overload, release the switch and eliminate the cause.
Avoid locking the motor rotation during use as a drill to prevent overheating or damage.
If the motor locks, immediately turn off the power to prevent burning the motor or battery.
Follow specific precautions to prevent battery leakage, heat generation, smoke, explosion, and ignition.
In case of battery liquid contact with eyes, flush immediately with water and seek medical attention.
If battery liquid contacts skin or clothes, wash immediately with clean water to prevent skin irritation.
Do not use the battery if rust, foul odor, overheating, or deformation is detected upon first use.
Notify the transport company about lithium-ion batteries, their power output, and follow their instructions.
General| Product color | Black, Green |
|---|---|
| Chuck type | - |
| Screwdriving | Yes |
| Product design | Pistol grip drill |
| Power source | Battery |
| Charging time | 30 min |
| Battery voltage | 3.6 V |
| Torque (max) | 2.9 N⋅m |
| Torque (min) | 0.3 N⋅m |
| Idle speed (max) | 600 RPM |
| Idle speed (min) | 200 RPM |
| Drilling diameter in concrete (max) | - mm |
| Number of batteries included | 2 pc(s) |
Weight and Dimensions| Depth | 268 mm |
|---|---|
| Weight | 450 g |
To Next Page
