Need help?Do you have a question about the HIKOKI D 10VH and is the answer not in the manual?
Essential safety rules for operating power tools to prevent injury and hazards.
Safety measures specific to using the drill, including securing work and avoiding hazards.
Details on voltage, power input, speed, drill chuck capacity, and weight.
Lists the accessories included with the drill, such as the chuck wrench.
Lists accessories available for separate purchase, like side handles and hooks.
Describes the primary uses of the drill, such as boring holes in various materials.
Guides on power source, switch, extension cords, and selecting drill bits before use.
Instructions for mounting bits, checking rotation, and attaching optional accessories.
Details on how to operate the power switch, control speed, and engage continuous run.
Guidance on starting, maintaining pressure, and handling the drill during drilling.
Importance of inspecting and replacing worn or abraded drill bits for optimal performance.
Checking mounting screws for tightness and caring for the motor unit.
Procedure for inspecting and replacing carbon brushes, requiring authorized service.
General| Power Source | Corded |
|---|---|
| Chuck Type | Keyless |
| Max Drill Diameter in Steel | 10 mm |
| Max Drill Diameter in Wood | 25 mm |
| Weight | 1.3 kg |
| Chuck Capacity | 1.5-10 mm |
| Power Input | 450 W |
| Chuck Size | 10 mm |
| No Load Speed | 0 - 2300 rpm |
| No-load Speed | 0-2300 /min |
| Voltage | 230 V |
To Next Page
