AX PRO User Manual
38
Wi-Fi Connection
You can make the AX PRO connect to Wi-Fi through APP.
Steps
1. On the device list page, tap the AX PRO and then log in to the device (if required) to enter the
page.
2. Tap →Communication Parameters→ Wi-Fi.
3. Follow the instructions on the page and change the AX PRO to the AP mode. Tap Next.
4. Select a stable Wi-Fi for the device to connect.
5. Back to configuration page to enter the Wi-Fi password and tap Next.
6. Tap Connect to a network and wait for connection.
After the connection is completed, the AX PRO will prompt to exit AP mode and automatically
switch to STA mode.
Device Maintenance
You can reboot the device.
Steps
1. On the device list page, tap the AX PRO and then log in to the device (if required) to enter the
page.
2. Tap → Project Maintenance → Device Maintenance.
3. Tap Reboot Device .
The AX PRO will reboot.
To Next Page
Loading...
Need help?
General
