
Do you have a question about the HIKVISION DS-2AE4223TI-A and is the answer not in the manual?
| Camera Type | PTZ Camera |
|---|---|
| Sensor Type | 1/3" Progressive Scan CMOS |
| Signal System | PAL/NTSC |
| Optical Zoom | 23x |
| Digital Zoom | 16x |
| Minimum Working Distance | 10 mm to 1500 mm (wide-tele) |
| Aperture Range | F1.6 to F3.5 |
| IR Distance | Up to 100 m |
| Gain | Auto/Manual |
| Shutter Time | 1/1 s to 1/30, 000 s |
| Day & Night | ICR |
| Horizontal Rotation Range | 360° endless |
| Vertical Rotation Range | -15° to 90° (auto flip) |
| Pan Range | 360° endless |
| Tilt Range | -15° to 90° (auto flip) |
| Presets | 256 |
| Patrol Scan | 8 patrols, up to 32 presets per patrol |
| Scheduled Task | Preset/Patrol/Pattern/Auto Scan |
| Alarm Input | 2 |
| Alarm Output | 1 |
| Effective Pixels | 1920 (H) × 1080 (V) |
| Min. Illumination | 0.05 Lux @ (F1.6, AGC ON) |
| IR irradiation angle | Auto/Manual |
| White Balance | Auto/Manual/ATW/Indoor/Outdoor/Sodium Lamp |
| Proportional Zoom | Yes |
| Power Loss Recovery | Support |
| Park Action | Preset / Patrol / Pattern |
| Auto Focus | Yes |
| RS-485 Protocols | Pelco-P, Pelco-D, HIKVISION |
| Video Compression | H.264 |
| Audio Compression | G.711alaw / G.711ulaw / G.722.1 / G.726 / MP2L2 |
| Network Interface | RJ45 10M / 100M Ethernet |
| Power Supply | 24 VAC |
| Operating Conditions | -30 °C to 65 °C (-22 °F to 149 °F), Humidity 90% or less (non-condensing) |
| Protection Level | IP66 |
| Power Consumption | Max. 20 W |











