Need help?Do you have a question about the HIKVISION DS-2CD2732F-IS and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | - |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Wide Dynamic Range (WDR) | Yes |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| Protection features | Vandal proof |
| International Protection (IP) code | IP66 |
| Total megapixels | 3 MP |
| Maximum resolution | 2048 x 1536 pixels |
| Supported video modes | 1080p, 720p |
| Video formats supported | H.264, M-JPEG |
| Analog signal format system | NTSC, PAL |
| Supported graphics resolutions | 1280 x 720 (HD 720), 1920 x 1080 (HD 1080) |
| Pan range | 0 - 355 ° |
| Tilt angle range | 0 - 75 ° |
| Angle of rotation | 355 ° |
| Camera shutter speed | 1/25(1/30) - 1/100.000 s |
| Minimum illumination | 0.07 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Optical zoom | - x |
| Lens diameter | 14 mm |
| Focal length range | - mm |
| Password protection type | User |
| Built-in HDD | No |
| Compatible memory cards | SD, SDHC, SDXC |
| Maximum memory card size | 64 GB |
| LED type | IR |
| Night vision distance | 20 m |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| AC input voltage | 12 V |
| Power source type | PoE |
| Power consumption (max) | 5.5 W |
| Operating temperature (T-T) | -30 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Width | 139.9 mm |
|---|---|
| Height | 99.9 mm |
| Weight | 1000 g |
| Diameter | 140 mm |
Details FCC compliance and conditions for digital devices operating under part 15 of FCC Rules.
Confirms product compliance with applicable harmonized European standards for safety and EMC directives.
Defines warnings for serious injury or death and cautions for injury or damage, illustrated with icons and text.
Ensures compliance with electrical safety regulations and specifies required input voltage (SELV, 24 VAC/12 VDC) per IEC60950-1.
Outlines precautions for operating environment, handling, power, and avoiding damage to the camera sensor.
Advises on regular part replacement, battery handling, and contacting service for malfunctions.
Details the components of the network dome camera, including their numbers and descriptions.
Ensures proper installation by checking package, power, environment, and IR reflection precautions.
Step-by-step instructions for safely disassembling the camera, including removing the bubble and liner.
Guide for mounting the camera on the ceiling, including drilling holes and cable routing.
Steps for routing cables from the side of the camera using a conduit for protection.
Instructions for installing the camera using a ceiling gang box for a clean, integrated mount.
Procedure for mounting the camera on a wall using an external wall mount and adapter.
Steps for adjusting the camera's image, including 3-axis movement and zoom/focus.
Details network cable connection and the purpose of setting the camera's IP address for LAN access.
Explains how to use SADP software to find online devices and modify network parameters like IP address.
Lists the necessary operating system, CPU, RAM, display resolution, and web browser versions.
Steps to access the camera's interface via a web browser, including entering IP, username, and password.
Guidance on installing the necessary web plug-in for viewing live video and managing the camera.
To Next Page
