UM DS-2CE1xU8T-ITx 042618NA 16
• Contrast
This feature enhances the difference in color and
light between parts of an image. You can set the
Contrast value from 1 to 10.
• Sharpness
Sharpness determines the amount of detail an
imaging system can reproduce. You can set the
Sharpness value from 1 to 10.
• Saturation
Adjust this feature to change the saturation of the
color. The value ranges from 1 to 10.
• 3D DNR (Digital Noise Reduction)
The 3D DNR function can decrease the noise
effect, especially when capturing moving images in
poor light conditions, and deliver more accurate
and sharp image quality. You can set the 3D DNR
value from 1 to 10.
• Mirror
Off, H, V, and HV are selectable for mirror.
Off: The mirror function is disabled. H: The image
flips 180° horizontally. V: The image flips 180°
vertically.
HV: The image flips 180° both horizontally and
vertically.
• Defog
It is used in special environments such as foggy or
rainy weather, or in high illumination conditions, in
which the dynamic range is lower than that in an
ordinary environment and the image appears hazy.
Enabling the defog function can enhance subtle
details to display clear images.
4.4 Factory Default
Click Iris+ to enter the submenu, and click OK to reset
all the settings to the factory default. Click Cancel to
give up the reset settings.
4.5 Save & Exit
Move the cursor to Save & Exit, and click Iris+ to save
the settings and exit the menu.
To Previous Page
Loading...
