DS-2TD2xxx-xx/xx Thermal and Optical Bi-Spectrum Network Bullet Camera Quick Start Guide
QSG DS-2TD2xxx-xx/xx 071720NA 28
Figure 40, Activation Interface (Web)
Create a password and input it into the password field.
STRONG PASSWORD RECOMMENDED ā We highly recommend that you create a strong password
of your own choosing (using a minimum of eight characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. We also recommend that you
reset your password regularly. Especially in high security systems, resetting the password
monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Confirm the password.
Click OK to save the password and enter the live view interface.
Activate via SADP Software
SADP software is used to detect the online device, activate the camera, and reset the password.
Get the SADP software from the supplied disk or the official Website, and install it according
to the prompts. Follow the steps to activate the camera. Refer to the network camera user
manual for the other two activation methods.
Run the SADP software to search the online devices.
Check the device status from the device list, and select the inactive device.
To Next Page
Loading...
Need help?
General
