Thermal Network Camera User Manual
38
Chapter 9 Video and Audio
This part introduces the configuration of video and audio related parameters.
9.1 Video Settings
This part introduces the settings of video parameters, such as, stream type, video encoding, and
resolution.
Go to setting page: Configuration → Video/Audio → Video.
9.1.1 Stream Type
For device supports more than one stream, you can specify parameters for each stream type.
Main Stream
The stream stands for the best stream performance the device supports. It usually offers the
best resolution and frame rate the device can do. But high resolution and frame rate usually
mean larger storage space and higher bandwidth requirements in transmission.
Sub Stream
The stream usually offers comparatively low resolution options, which consumes less bandwidth
and storage space.
9.1.2 Video Type
Select the content (video and audio) that should be contained in the stream.
Video
Only video content is contained in the stream.
Video & Audio
Video content and audio content are contained in the composite stream.
9.1.3 Resolution
Select video resolution according to actual needs. Higher resolution requires higher bandwidth
and storage.
9.1.4 Bitrate Type and Max. Bitrate
Constant Bitrate
To Next Page
Loading...
Need help?
General
