Thermal Network Camera User Manual
74
Note
● Complete certificate management before selecting server certificate. Refer to for detailed
information.
● If the function is abnormal, check if the selected certificate is abnormal in Certificate
Management.
5. Click Save.
12.13.8 Set QoS
QoS (Quality of Service) can help improve the network delay and network congestion by setting
the priority of data sending.
Note
QoS needs support from network device such as router and switch.
Steps
1. Go to Configuration → Network → Advanced Configuration → QoS.
2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP.
Note
Network can identify the priority of data transmission. The bigger the DSCP value is, the higher
the priority is. You need to set the same value in router while configuration.
3. Click Save.
12.13.9 Set IEEE 802.1X
You can authenticate user permission of the connected device by setting IEEE 802.1X.
Go to Configuration → Network → Advanced Settings → 802.1X, and enable the function.
Select protocol and version according to router information. User name and password of server
are required.
12.14 User and Account
12.14.1 Set User Account and Permission
The administrator can add, modify, or delete other accounts, and grant different permission to
To Next Page
Loading...
Need help?
General
