2.
Enter Destination IP or Host Name, URL, and Port.
3.
Select Protocol.
Note
HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts
the data transmission during communication.
4.
Click Test to check if the IP or host is available.
5.
Click Save.
3.12 Set Network Service
You can control the ON/OFF status of certain protocol as desired.
Steps
Note
This function varies according to different models.
1.
Go to Conguration > Network > Advanced Settings > Network Service .
2.
Set network service.
WebSocket & WebSockets
WebSocket or WebSockets protocol should be enabled if you use Google Chrome 57
and its above version or Mozilla Firefox 52 and its above version to visit the device.
Otherwise, live view, image capture, and digital zoom function cannot be used.
If the device uses HTTP, enable WebSocket.
If the device uses HTTPS, enable WebSockets.
TLS (Transport Layer Security)
The device offers TLS1.1 and TLS1.2. Enable one or more protocol versions
according to your need.
Bonjour
Bonjour is a
zero-conguration protocol used to automatically nd devices in a
network or create networks between devices. You can disable it when not using the
protocol.
3.
Click Save.
3.13 Set SRTP
The Secure Real-time Transport Protocol (SRTP) is a Real-time Transport Protocol (RTP)
internet protocol, intended to provide encryption, message authentication and integrity,
and replay attack protection to the RTP data in both unicast and multicast applications.
Thermal & Optical Bi-spectrum Network Camera User Manual
13
To Next Page
Loading...
Need help?
General
