Set the duration of the alarm with combined events.
Restore Parameters
Restore Default
Click Restore to restore the parameters to the default.
Restart VCA
Click Restart to restart the VCA function.
Note
The settings vary according to different models.
7.4 Open Platform
Open platform allows you to install the application for the third-party to develop and run its
function and service.
Note
Only certain device models support the function.
7.4.1 Set Open Platform
You can install the application for the third-party to develop and run its function and
service. For the device supporting this function, you can follow the steps to import and run
smart applications.
Before You Start
Go to
Conguration > System > Maintenance > VCA Resource Type , select Temperature
Measurement + Open Platform.
Steps
1.
Go to Open Platform interface.
Note
Before installing the application, make sure that the application you want to install t the
following conditions.
●
Each application has its own exclusive name.
●
The FLASH memory space that the application takes up is less than the available
FLASH memory space of the device.
●
The memory and computing power of the application is less than that available
memory and computing power of the device.
2.
In Apps, click Import Application.
3.
Click Browse to select an application package.
Thermal & Optical Bi-spectrum Network Camera User Manual
74
To Next Page
Loading...
Need help?
General
