HIKVISION DS-2TP31B-3AUF - Install Memory Card

IR Lens
Cover
Trigger
USB Interface
Micro SD Slot
Tripod
Interface
Charging
Indicator
When the device is charging,
the LED indicator is red.
When the device is fully
charged, the LED indicator is
green.
USB
Interface
Charge the battery and
export snapshots with the
USB cable.
Trigger
Pull the trigger to capture
snapshots.
2.3 Install Memory Card
Insert memory card to record videos, capture
snapshots, and mark and save important data.
Steps:
1. Open the top cover of the device.
2. Insert memory card slowly into the
micro SD slot. When you hear the click
sound, the memory card is installed.
3. Close the cover after installation.
3 Basic Operations
3.1 Charging the Device
Steps:
1. Open the top cover of the device.
2. Connect the USB interface and the
power adaptor with USB cable.
USB interface