User Manual of Handheld Thermal Multi-function Binocular Camera
8
2.5 Power On/Off
When the binocular is fully charged, press the key to power on
it.
When the binocular is running, hold the key to power off it.
Turn the device according to the figure below after starting up. You
can use the DMC function when the calibration level in the upper
left corner of the screen is three.
Only models without laser distance measurement require the operation
in the figure, please take the actual model for reference.
See the battery icon for the electricity quantity. means battery is
fully charged, and means that the battery runs low.
When the low power note shows, charge the battery.
2.6 Menu Description
Step:
Hold the button to show the menu.
In the menu, the direction keys, OK key, and the Exit key are shown
below.
See the figure below for the menu interface.
The figure below is only for reference, the font size is readjusted for
better viewing.
To Next Page
Loading...