HIKVISION DS-2TS36-75VI/WL - Maintenance; Restore Device; Upgrade Device

User Manual of Handheld Thermal Multi-function Binocular Camera
19
2. Press the key and key to move the cursor and open
Settings submenu.
3. Press the key and key to move the cursor and open
CVBS ON/OFF submenu.
4. Press the key to switch on CVBS.
9 Maintenance
9.1 Restore Device
Purpose:
Restore the device to default settings.
Steps:
1. Hold the key to show the menu of binocular.
2. Press the key and key to move the cursor to Settings
submenu.
3. Press the key to confirm.
4. Press the key and key to move the cursor to Reset
submenu.
5. Press the key to confirm.
After restoring, the device reboots automatically. You need to
activate the device again.
9.2 Upgrade Device
Steps:
1. Connect the device to your PC with cable and open the detected
disk.
2. Copy the upgrade file and paste it to the root directory of the
device.
3. Disconnect the device from your PC.
4. Reboot the device and then it will upgrade automatically. The
upgrading process will be displayed in the main interface.