HIKVISION DS-2XE62 2F-IS Series User Manual

Network Bullet Camera·Quick Start Guide
23
23
Get the SADP software from the supplied disk or the official website,
and install the SADP according to the prompts.
Follow the steps to activate the camera.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the
inactive device.
Select inactive device.
Input and confirm
password.
SADP Interface Figure 4-4
Note:
The SADP software supports activating the camera in batch. Refer
to the user manual of SADP software for details.
3. Create and input the new password in the password field, and
confirm the password.

HIKVISION DS-2XE62 2F-IS Series Specifications

General

Brand	HIKVISION
Model	DS-2XE62 2F-IS Series
Category	Security Camera
Language	English