
Do you have a question about the HIKVISION DS-2XE6145G0-HS and is the answer not in the manual?
| Image Sensor | 1/2.8" Progressive Scan CMOS |
|---|---|
| Max. Resolution | 2560 × 1440 |
| IR Range | 30 m |
| Weatherproof Rating | IP66 |
| WDR | 120 dB |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Ingress Protection | IP66 |
| Digital Noise Reduction | 3D DNR |
| Alarm I/O | 1 input, 1 output |
| Vandal Resistance | IK10 |
| Resolution | 2560 × 1440 |
| Camera Type | Network Camera |
| Lens | 2.8 mm |
| Power Supply | 12 VDC ± 25% |
| Day/Night | ICR |
| Focal Length | 2.8 mm |
| Max. Aperture | F1.6 |
| Pan/Tilt Range | Pan: 0° to 360°, Tilt: 0° to 75° |
| Power-up Action | Auto restore to previous PTZ and lens status after power failure |
| Idle Motion | Auto cruise |
| Protocol | TCP/IP, HTTP, HTTPS, DHCP, DNS, DDNS, RTP, RTSP, UPnP, NTP, SMTP, FTP, IGMP, QoS, 802.1x |
| Network Interface | 1 RJ45 10 M/100 M self-adaptive Ethernet port |
| Audio I/O | 1 input, 1 output |
| Operating Conditions | -30 °C to +60 °C, Humidity 95% or less (non-condensing) |











